气瓶内部淬火过程的流动换热特性

 大直径厚壁气瓶内部淬火时的流动换热过程极其复杂，受到多种因素的影响，而研究气瓶内部压强和温度的变化规律对改善流动换热效果、提高产品组织性能具有重要的理论指导意义。以914 mm厚壁气瓶和瓶内流体为研究对象，建立了二维等效流 固耦合模型；采用多喷嘴系统对气瓶内外进行喷水淬火，研究了气瓶总长、喷水流速及淬火时间对瓶内压强及内壁温度的影响，通过间歇淬火试验验证了数学模型的正确性。结果发现，气瓶长度对瓶内压强和瓶壁温度的影响显著，喷水流速次之，当喷水流速大于8 m/s后，水量对瓶壁的冷却效果大大降低；气瓶内壁长度方向的温度梯度分别随气瓶总长的增加和淬火时间的延长而减小，但基本不受喷水量的影响。     

Mathematical model for coal conversion in supercritical water: reacting multiphase flow with conjugate heat transfer

Providing heat for supercritical water gasification (SCWG) of coal by coupling subsequent products oxidation in integrated supercritical water reactor (ISWR) provides an effective method for directional control of temperature field and avoids excessive hot spots caused by uniform heating. An exploratory numerical model incorporating particle-fluid flow dynamics, multispecies transport and thermal coupling between endothermic coal gasification and exothermic product oxidation was established to simulate the reacting multiphase flow process of coal conversion in a novel lab-scale ISWR. An eleven-lump kinetic model was proposed for the prediction of chemical reactions. And the thermal coupling relationship was described by conjugate heat transfer boundary conditions (BC). Detailed physical and chemical field distribution in ISWR were analyzed and influence factors were discussed. The results showed that oxidation of gas products as inner heat source could promote the gasification reaction with only slight or even little maximum temperature increase of the pressure-bearing wall. Coal feeding rate and oxygen supply method significantly affected the field distribution. The multi-injection compressed-air supply method provided a more uniform temperature field but would reduce heat transfer temperature difference. The carbon gasification efficiency (CGE) in the gasification zone could easily reach up to 97% under mild conditions (less than 650 °C).     

基于概要数据结构的全网络持续流检测方法

持续流是隐蔽的网络攻击过程中显现的一种重要特征，它不产生大量流量且在较长周期内有规律地发生，给传统的检测方法带来极大挑战。针对网络攻击的隐蔽性、单监测点的重负荷和信息有限的问题，提出全网络持续流检测方法。首先，设计一种概要数据结构，并将其部署在每个监测点；其次，当网络流到达监测点时，提取流的概要信息并更新概要数据结构的一位；然后，在测量周期结束时，主监测点将来自其他监测点的概要信息进行综合；最后，提出流持续性的近似估计，通过一些简单计算为每个流构建一个位向量，利用概率统计方法估计流持续性，使用修正后的持续性估计检测持续流。通过真实的网络流量进行实验，结果表明，与长持续时间流检测算法（TLF）相比，所提方法的准确性提高了50%，误报率和漏报率分别降低了22%和20%，说明全网络持续流检测方法能够有效监测高速网络流量。     

Texture Feature Extraction Method for Ground Nephogram Based on Contourlet and the Power Spectrum Analysis Algorithm

It is important to extract texture feature from the ground-base cloud image for cloud type automatic detection. In this paper, a new method is presented to capture the contour edge, texture and geometric structure of cloud images by using Contourlet and the power spectrum analysis algorithm. More abundant texture information is extracted. Cloud images can be obtained a multiscale and multidirection decomposition. The coefficient matrix from Contourlet transform of ground nephogram is calculated. The energy, mean and variance characteristics calculated from coefficient matrix are composed of the feature information. The frequency information of the data series from the feature vector values is obtained by the power spectrum analysis. Then Support Vector Machines (SVM) classifier is used to classify according to the frequency information of the trend graph of data series. It is shown that altocumulus and stratus with different texture frequencies can be effectively recognized and further subdivided the types of clouds.     

Thermal imaging of time-varying longitudinal defects in the internal coating of a tube

We deal with the mathematical model of the incremental degradation of the internal coating (e.g. a polymeric material) of a metallic pipe in which a fluid flows relatively fast. The fluid drags solid impurities so that longitudinal scratches, inaccessible to any direct inspection procedure, are produced on the coating. Time evolution of this kind of defects can be reconstructed from the knowledge of a sequence of temperature maps of the external surface. The time-varying orthogonal section of this damaged interface is determined as a function of time and polar angle through the identification of a suitable effective heat transfer coefficient by means of Thin Plate Approximation.     

临床腋窝淋巴结阳性老年三阴性乳腺癌局部治疗策略

因老年乳腺癌患者多伴发基础疾病,在选择局部治疗方案时,除应考虑原发肿瘤本身因素外,还需评估患者重要器官功能及其对治疗的耐受能力。三阴性乳腺癌与其他亚型乳腺癌相比,主要表现为侵袭性强、预后不佳;而临床腋窝淋巴结阳性的老年三阴性乳腺癌患者,局部治疗的选择则更为棘手,对于此类特殊群体,尚需探索更为合理的个体化治疗方案。     

Formation of radioactive cesium microparticles originating from the Fukushima Daiichi Nuclear Power Plant accident: characteristics and perspectives

ABSTRACT

Following identification of radioactive Cs microparticles (CsMPs) in aerosol samples from the Fukushima Daiichi Nuclear Power Plant (FDNPP), numerous reports on CsMPs have been published. This paper reviews recent progress in the measurement and characterization of CsMPs by advanced analytical techniques, including advanced transmission electron microscopy (TEM) and synchrotron X-ray analysis. These analyses revealed that the CsMPs contained Si, Fe, Zn, Cs, and minor quantities of U together with some fission products. Uranium in the CsMPs was identified as being in the form of uraninite and (U,Zr)O₂. Detailed advanced TEM analysis has clarified some of the processes resulting in the alteration of constituents of the nuclear fuels and containment vessel materials during this severe accident. In addition, a detailed report on the elemental compositions and structures of the fuel debris fragments collected inside and outside of the primary containment vessel²⁵ highlighted the fact that the fuel debris fragments contained nanoparticles with the U and Zr components having similar structures to that of the CsMPs. This similarity in structures has stimulated further research on the structure and elemental constituents, especially for U and Zr in the CsMPs, and has opened up new avenues for studying the chemical characteristics of the fuel debris.     

Weighted power means of q-rung orthopair fuzzy information and their applications in multiattribute decision making

Weighted power means with weights and exponents serving as their parameters are generalizations of arithmetic means. Taking into account decision makers' flexibility in decision making, each attribute value is usually expressed by a $q$-rung orthopair fuzzy value ($q$-ROFV, $q\ge 1$), where the former indicates the support for membership, the latter support against membership, and the sum of their $q$th powers is bounded by one. In this paper, we propose the weighted power means of $q$-rung orthopair fuzzy values to enrich and flourish aggregations on $q$-ROFVs. First, the $q$-rung orthopair fuzzy weighted power mean operator is presented, and its boundedness is precisely characterized in terms of the power exponent. Then, the $q$-rung orthopair fuzzy ordered weighted power mean operator is introduced, and some of its fundamental properties are investigated in detail. Finally, a novel multiattribute decision making method is explored based on developed operators under the $q$-rung orthopair fuzzy environment. A numerical example is given to illustrate the feasibility and validity of the proposed approach, and it is shown that the power exponent is an index suggesting the degree of the optimism of decision makers.     

基于OpenFOAM的过冷流动沸腾数值模拟

过冷流动沸腾现象被广泛应用于工业生产和动力系统中，对该现象的准确预测是两相流CFD模拟的重要研究方向。本文详细阐述了该模拟过程中的欧拉两流体模型及相关辅助模型，基于开源CFD平台OpenFOAM，模拟了4.5 MPa下竖直圆管内的过冷流动沸腾，得到了截面空泡份额、液相平均温度及壁面温度沿轴向的分布。计算结果与实验值符合良好，说明了模型的有效性和程序的正确性。本文可为在OpenFOAM中添加新的模型及开发新的求解器以模拟过冷流动沸腾问题提供参考。